How do I reset my Xterra treadmill after lubricant?
How do I reset my Xterra treadmill after lubricant?
Turn off the main switch on the front of the treadmill, below the motor cover. When “Lube” appears on the LCD check lubrication under walking deck. See the instructions on page 20 to add lube as needed. After application hold PROGRAM for 3 seconds to reset the message.
How do I lubricate my Xterra treadmill?
Plug the treadmill power cord back in, and turn the power switch back on. Walk on the belt at a moderate speed for 5 minutes to evenly distribute the lubricant along the treadmill belt and deck. Your treadmill belt is now lubricated. Normal use can resume.
How do I reset my Xterra treadmill?
How do I calibrate my Xterra treadmill?
- Unplug the treadmill for at least 30 seconds.
- Remove the safety key and plug the treadmill back in.
- Push the “Reset” button once so that “10” appears on the display.
- Press the “Enter” button four times, then “Start” once, then “Enter” once more.
- Replace the safety key.
Can you use Xterra lubricant on a treadmill?
Do not lubricate with anything other than XTERRA Fitness approved lubricant. Your treadmill comes with one tube of “Lube” and extra tubes can be ordered directly from XTERRA Fitness. Click here to order.
Where can I buy silicone lubricant for my treadmill?
Most hardware stores will sell silicone lubricant spray, it’s the same stuff. Try Googling 100% silicone lubricant and leave out the word treadmill or ask at your local hardware for silicone lubricant spray.
What happens if the lubricant on my treadmill dries out?
If the lubricant dries out, the friction between the belt and deck rises and places undue stress on the drive motor, drive belt and electronic motor control board, which could result in catastrophic failure of these expensive components. How do you check your treadmill’s belt lubrication?
How do you lubricate the deck of a treadmill?
You will need to access the deck and this can be achieved by lifting the belt on the treadmill up with your fingers, or you could get somebody to help you out with this. Spread a straight line of treadmill lubricant which may be listed in the manual when purchased, down the side of the deck.
Do not lubricate with anything other than XTERRA Fitness approved lubricant. Your treadmill comes with one tube of “Lube” and extra tubes can be ordered directly from XTERRA Fitness. Click here to order.
What kind of lubricant should I use on my treadmill?
Perfect for reducing friction between your treadmill belt and deck, lubricant will also help reduce noise, breathe life back into unused treadmills, and is an important part of regular treadmill maintenance. What Treadmill Lubricant should you use? Do not lubricate with anything other than XTERRA Fitness approved lubricant.
How often should I lubricate my treadmill deck?
Higher end models may not need as frequent lubrication, for example the TRX3500 recommends every 80 hours of use or earlier if you notice that the deck is dry or dirty. Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your treadmill.
What kind of lube do I use on my sole elliptical?
This lube seems to be the exact same kind that originally came with my Sole elliptical. It was difficult to find the same kind, and this appears to be the right one. It has worked great to lubricate the tracks on my elliptical.