What are the different rough in sizes for toilets?

What are the different rough in sizes for toilets?

The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.

What is the difference between a 12 and 14 rough in toilet?

While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.

How do you measure toilet rough in?

The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).

Can you replace a 10 inch rough in toilet with a 12 inch?

Replacing the closet flange with an offset flange to get the 12″ rough specs is WAY too much work to do in your situation. Simply return the toilet and get a 10″ rough model. They are usually no trouble to get. Most plumbing wholesale stores have them in stock.

Can you replace a 12 inch rough in toilet with a 10 inch rough in toilet?

A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.

How far from the wall should a toilet rough in Be?

The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.

Can you put a 12 inch toilet in a 14 inch rough-in?

Most toilets that advertise as a 14″, install using a 12″ bowl. This leaves the bowl pretty far out into the room. TOTO at least gives you the option to shift the bowl back closer to the wall. And yes, they work great!

Can you replace a 10 inch rough-in toilet with a 12 inch?

Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?

Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.

How far from the wall should a toilet rough-in Be?

12 inches
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.

What does 10 inch Rough in toilet mean?

Measuring a 10-inch rough-in toilet is quite simple. Take some measuring tape and see how much you have from the wall to the main drain pipe. A 10-inch rough-in means that the toilet’s main drain is 10 inches away from your bathroom’s wall.

How do I measure toilet rough in?

Measure toilet rough in with existing toilet. On either side of your toilet, you’ll see two bolts (usually with caps on them). Measure from the center of those caps or bolts to the wall and that measurement is your “rough in”.

What is the standard plumbing hole for a toilet?

The standard size for the hole over which the toilet flange will be installed is approximately 4 1/2 inches in diameter. This hole is centered, for most toilets, 12 inches from the rear wall behind where the toilet will sit. There should also be at least 15 inches from the center of the hole to the walls on either side.

What does 10 inch Rough in mean?

A 10-inch rough-in means that the distance between the bolts on the base and the drain pipe in the wall is exactly 10 inches. Manufacturers make models with a rough-in of between 10 and 12 inches, though other models mount right on the wall or closer to the wall.