What is the R-value of froth pak?

What is the R-value of froth pak?

For Froth-Pak™ Sealant the LTTR value (Long term thermal resistance) measurement at 1 inch thick is 5.3 ft²•h•°F/Btu (R value) per inch. When sprayed to 2 inches thick the LTTR value (Long term thermal resistance) measurement at 2 inch thick is 5.5 ft²•h•°F/Btu (R value) per inch which is R11.

Is Froth Pak 620 closed cell?

Low GWP Spray Foam Sealant Kit, FROTH-PAK™ 620. FROTH-PAK™ polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for air sealing and improved insulation.

What is the R-value of high density foam?

Installed insulation R-value: The installed insulation R-value depends somewhat on the system manufacturer but generally speaking, high density foam (2.0 pcf) ranges between R-5.5 and R-6.5 per inch for the aged R-value, and low density foam (0.5pcf) has an R-value of approximately R-3.6/inch.

What is the highest R-value for spray foam insulation?

Closed-cell spray foam provides a higher R-value per inch (6.5) than less expensive insulation types like cellulose and fiberglass (3.5 to 3.7).

How long does Froth Pak last?

FROTH-PAK™ Foam Insulation kits are well-known for insulating stud wall cavities up to 2″ thick, cold floors above unheated areas, crawl space and attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after initial startup.

What is the difference between Froth Pak 200 and froth pak 210?

The difference is that a Froth Pak 210 (Dow part number 340316) is a Class A Fire-Rated Insulation Kit whereas the Froth Pak 200 is a Sealant Kit. The regular Froth-Pak 200 Sealant Kit, part # 346963, is used for air sealing and insulating when there is no need for a Class A fire-rating for the assembly.

Is Froth Pak 650 closed cell?

FROTH-PAK™ polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. The FROTH-PAK™ 650 kit yields up to 650 board feet of foam.

Can froth pak be used outside?

FROTH-PAK™ Foam Sealant can be used in interior or exterior commercial, residential, agricultural, industrial and institutional settings. ** If used in an exterior setting, a coating must be applied for ultraviolet (UV) protection.