What is error code D2 on electric meter?

What is error code D2 on electric meter?

Electricity meters Make sure you have a pen and paper to hand when you call. Error D2 or D4. Your key isn’t programmed correctly. Please contact us – we’ll give you an 8-digit number and tell you how to use it to reprogram your key.

What do I do if my electric meter is faulty?

Get your meter tested. Energy suppliers are required to investigate faulty meters. So if you suspect your meter is faulty, contact your supplier and ask them to carry out a test. Electricity meters are initially tested on-site by your supplier, who will carry out a preliminary check.

What does flashing e mean on electric meter?

emergency credit
Shows a value and a flashing ‘E’, means the emergency credit is available on the meter (this will only be displayed when your credit is under 50p). The word ‘DEBT’ and there’s a emergency credit is available. The word ‘DEBT’ and there’s a emergency credit is not available. The amount of emergency credit you’ll get.

What is meter error?

In practice the flow meter error is a combination of repeatability, accuracy and the uncertainty of the reference calibration.

What does error D1 mean on electric meter?

If the message starts with a D1 or D5 sometimes it’s just a bit of dust on the key that stops it working. Wipe the key to clear any dust or wipe it with a clean cloth, then try putting it in your meter again.

Is it possible to have a faulty electric meter?

Faulty gas or electricity meters are rare. But you should still keep an eye on your meter to make sure it’s working properly. A damaged or faulty meter could be a safety hazard. It could also cost you money.

What does Error 14 mean on an electric meter?

Top answer. posted by Davc | A year ago. Re: Key metre error 14. Contact us to arrange an appointment as the meter needs to be changed. If you are off supply, we may need to arrange an emergency appointment.

How do I get rid of error 30 on my prepaid meter?

Error 30 – Technical error on your meter – please switch your meter off as well as your electricity mains and wait a few minutes. Turn back on and retry the token. If this error 30 persists you should contact your municipality and get a technician to have a look at the meter.

What should I do if I get a meter error?

To try and troubleshoot this error, please switch off your meter, as well as your electricity mains and give it a few minutes. Afterwards, turn back on your mains and meter back on and retry your token.

What does it mean when your meter says error 30?

Error 30 – Technical error on your meter. To try and troubleshoot this error, please switch off your meter, as well as your electricity mains and give it a few minutes. Afterwards, turn back on your mains and meter back on and retry your token.

What are the problems with an electric meter?

Common Issues with a Faulty Electric Meter Sudden spikes in energy costs. These spikes can range from relatively small, to astronomical. Digital errors. If your meter features a digital display, you’re in luck. Failure to operate. Whether digital or mechanical, a meter has moving parts.

What does it mean when your top up meter says something is wrong?

If something’s wrong with your top up meter, key or card, your meter will show an error code or message. Here are the most common errors, along with advice on what to do next. Electricity meters If your screen is blank. This happens when your meter goes into fail-safe mode, usually after a power cut.