How often should you use Liqui Moly ceratec?
How often should you use Liqui Moly ceratec?
Liqui Moly recommends adding it to fresh oil during a oil change or add to existing oil when you have at least 5,000km (3,100 miles) left before an oil change. This gives the product sufficient time to coat all areas — once coated last for 50000km (31,000 miles) so it is not needed every oil change.
What does Liqui Moly ceratec do?
CERA TEC is a high-tech ceramic wear protection product for all motor oils. CERA TEC reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. The low-friction effect reduces fuel consumption in gasoline and diesel engines.
How do you use Liquic Moly CERA TEC?
What is Cera Tec and how do I apply it?
- direct addition to the motor or transmission oil (cold or warm)
- ideally, pour in together with fresh oil when changing the oil.
- 300 ml is sufficient for up to 5 liters of motor oil.
- the optimal dosage is about 6 % of the total oil fill quantity.
Can you add Liqui Moly to synthetic oil?
Can the oil additive also be mixed with fully synthetic motor oils? Yes, this has been tested by a field test with company cars. The oil additive minimizes friction by approx. 30%.
What is Liqui Moly Diesel Purge?
Liqui Moly Diesel Purge is a fuel system and injector cleaner that is suitable for all diesel engines both with and without diesel particulate filters. Use as a preventative measure during every inspection, after repairs on the fuel system or to solve problems.
Do Liqui Moly additives work?
Contents are high dosage of MOS2 (molybdenum-disulfide) and it does actually work well. It will reduce valve chain chatter, improve mpg, lower engine temperature and wear on an engine; however! Sludgy Euro/Diesel engines are better off using Ceratec as that tends to thin oil and limit sludging.
Can you mix Liqui Moly additives?
Can two oil or fuel additives be used at the same time? Yes, our additives are aligned to one another in their formula in such a way that they do not negatively influence themselves and the overall mixture. However, the dose specifications have to be observed, of course.
Is Liqui Moly really good?
It has good cold-start behavior, as well as improved wear characteristics for modern engines. LIQUI MOLY MoS2 is also recommended for older Porsches with air-cooled engines. The extra additives are very effective at reducing wear for high-heat situations, another difficulty for oil manufacturers.
Can you mix Liqui Moly with synthetic oil?
Can you mix LIQUI MOLY oil?
Refilling motor oil: Can you mix motor oil in the car? The mixability of modern motor oils with one another, regardless of the type, must be possible under any circumstances.
Can you mix LIQUI MOLY with mobil1?
Also, I have added additives Slick 50 and Liqui Moly MOS2 and Liqui Moly Ceratec to my oil. I mixed a quart of Mobil 1 with my Royal Purple crankcase oil. As long as they’re the same weight, they’ll “play nice” together.