How high does a letterbox have to be?
How high does a letterbox have to be?
between 900 mm and 1200 mm
The elevation of the letterbox slot should be between 900 mm and 1200 mm above the ground. By sticking closely to these measurements, and installing a box with a lock, you will know you have done all you can so that your mail will easily into your letterbox and stay there safely until you collect it.
How thick can a letter be Australia Post?
A small letter is: • no larger than 130mm x 240mm • no thicker than 5mm • no heavier than 250g. To avoid small letters being trapped in machinery or other letters, small letters should exceed 88mm x 138mm. Sealing of envelope mail is preferred. However if posted unsealed, the opening should not exceed 88mm.
Is there a weight limit for Australia Post?
The maximum allowed weight of a parcel lodged at a Post Office is 22kg. In some instances a Post Office may not have capacity to weigh parcels up to 22kg.
Where does your mailbox have to be?
Position your mailbox 41″ to 45″ from the road surface to the bottom of the mailbox or point of mail entry. Place your mailbox 6″ to 8″ back from the curb. If you do not have a raised curb, contact your local postmaster for guidance. Put your house or apartment number on the mailbox.
What happens if you have no letterbox?
If there is no letter box the postman will (or should) write “no delivery point” on the mail and take it back to the sorting office. It is then put in a box reserved for mail that cannot be delivered for any reason.
Does my mailbox have to be approved?
All mailboxes must be approved by the Postal Service™. Custom made mailboxes will be approved by the Postmaster if they meet established standards. A mailbox with a lock must have a slot large enough to accommodate customer’s daily mail volume.
How often are AUS post boxes emptied?
Australia Post on Twitter: “@featkathleen Collection times are advised on the box itself but they are collected once or twice a day usually – Nathan”
How much is a postage stamp in Australia 2020?
Australia’s standard stamp price will rise 10% in 2020. The price is already 25 times higher than when Australia went decimal. In an all too familiar development, the price of sending a standard letter will rise 10% from $1.00 to $1.10 from the start of 2020.
How can I send a large item to Australia?
Examples of large items to send
- Fold it down.
- Secure loose parts.
- Wrap all parts in protective material.
- Place inside a cardboard box.
- Fill space inside the box with protective materials.
- Tape to secure the box closed.
Can I move the location of my mailbox?
The USPS does not legislate the relocation of residential mailboxes nationally. Rather, they allow local postmasters to decide what is best for their geographic location and mail service. Make a quick trip or call to your local post office first. USPS mailbox location rules are strict.
How big does a mail box have to be in Australia?
Size of mail boxes Australia Post delivers only into mail boxes of an approved size. Mail box apertures may be either horizontal or vertical. Australia Post recommends a separate aperture, box or tube to accommodate newspapers and non-mail articles. Dimension Approved size Internal width (left to right) At least 230 mm Internal depth (front to
Do you need a mail room for Australia Post?
Australia Post may require a mail room or a mail locker for the use of postal delivery officers. Very large multi-storey residential or commercial buildings A single group of mail boxes located at a convenient point with motor vehicle access in a service area or basement.
How are templates accepted in a letterbox?
6.1 General All mailboxes shall be capable of separately accepting the two templates, as specified in Clause 6.2. The templates shall be able to pass through the mailbox delivery aperture and be deposited wholly within the internal space of the mailbox. The templates shall be able to be easily removed via the access door.
How big does a letterbox need to be?
Horizontal apertures should be at least 230mm x 30mm and 130mm above the base of the internal space. Vertical apertures should be at least 330mm x 30mm and 40mm above the base of the internal space. Single boxes should be erected so that the aperture is between 0.9m and 1.2m above the ground.