How can I change the speed of my treadmill?

How can I change the speed of my treadmill?

When you change the “speed” pot setting on an open-loop system you’ll see an immediate change in motor speed according to how much you have turned the pot. It’s just like an old-fashioned volume control – you turn it up to go faster and down to go slower.

What happens if you set the treadmill too fast?

Set it too slow and the machine may never reach the required set speed but set it too fast and the machine will overshoot the set point and “hunt” (oscillate faster and slower around the set point without actually settling down). A long-time, loyal customer of mine gave me the inspiration to write this post.

How does the calibration work on a treadmill?

It’s just like an old-fashioned volume control – you turn it up to go faster and down to go slower. However, treadmills with a closed-loop system (ie. those with a speed sensor) will tend to auto-calibrate the speed, within reason, to maintain the actual speed set point which has been defined within the control console’s settings.

What to do if your treadmill is not running?

There may be a problem with your machine if the speed varies as you are running. Begin by checking the owner’s manual for the recommended speed setting. Set the machine to the recommended setting but do not get on. Observe the treadmill for several minutes to see if there is any hitching in the belt.

When you change the “speed” pot setting on an open-loop system you’ll see an immediate change in motor speed according to how much you have turned the pot. It’s just like an old-fashioned volume control – you turn it up to go faster and down to go slower.

Set it too slow and the machine may never reach the required set speed but set it too fast and the machine will overshoot the set point and “hunt” (oscillate faster and slower around the set point without actually settling down). A long-time, loyal customer of mine gave me the inspiration to write this post.

It’s just like an old-fashioned volume control – you turn it up to go faster and down to go slower. However, treadmills with a closed-loop system (ie. those with a speed sensor) will tend to auto-calibrate the speed, within reason, to maintain the actual speed set point which has been defined within the control console’s settings.

How do you reset a treadmill speed sensor?

Connect the black and white leads from the motor to the circuit board. Put the hub covers on the sides of the treadmill frame. Attach the motor cover. Plug the treadmill power cord into an electrical outlet. Follow the owner’s manual instructions for resetting the treadmill.