How do you fix an E6 error on a Trojan treadmill?
How do you fix an E6 error on a Trojan treadmill?
E6 or E7
- Turn the power OFF, wait 5-seconds and turn back ON.
- Get into test mode and enter through the I/O testing step.
- Once the unit is in the mid-level position, power the treadmill off for 5-seconds and then power it back ON.
- Start the treadmill.
Is the horizon T101 treadmill an E1 error?
I have a horizon T101 treadmill with an E1 error. The motor attempts to start twice but nothing moves. It is just over a year old. Has been working great up to now. Thank you for your help.
How does the E1 error code work on a treadmill?
The “Start” button is pushed and the E1 error code is displayed immediately. The “Start” button is pushed, the display count for 6 seconds, and then the E1 error code appears. The belt does not move in this situation.
What to do if you cant reset your horizon treadmill?
Turn the treadmill off and back on if you receive an error code when trying to reset the Horizon Treadmill and repeat the steps above. Contact Horizon customer service at 1-800-244-4192, if you have problems resetting your treadmill.
What to do when you get an E1 error code?
If the E1 error code shows immediately it is likely a wiring connection problem. Check the connector at the back of the display, in the handlebars and at the bottom of the right side support post. Make sure that the connectors are turned the right way, that none of the pins are bent and that they are firmly pressed together.
I have a horizon T101 treadmill with an E1 error. The motor attempts to start twice but nothing moves. It is just over a year old. Has been working great up to now. Thank you for your help.
What to do if your horizon treadmill is not working?
First, determine which cord will work with your product by checking the power cord guide. To purchase the replacement power cord, visit the Horizon Fitness replacement parts section. The message “safety key off” displays across the console window. The elevation function is not working properly. Unplug the treadmill from the outlet.
The “Start” button is pushed and the E1 error code is displayed immediately. The “Start” button is pushed, the display count for 6 seconds, and then the E1 error code appears. The belt does not move in this situation.
If the E1 error code shows immediately it is likely a wiring connection problem. Check the connector at the back of the display, in the handlebars and at the bottom of the right side support post. Make sure that the connectors are turned the right way, that none of the pins are bent and that they are firmly pressed together.