What should the load density be on smokeless powder?

What should the load density be on smokeless powder?

It is generally recommended that anyone reloading should not try to exceed 95% load density because the primers need room to flame through the powder, which will result in more consistent pressure and bullet velocity. It is also recommended that density should not go below 80%.

Who are the most successful smokeless powder companies?

Hodgdon Powder is arguably the most successful powder company in the U.S.A. Founder Bruce Hodgdon purchased 50,000 pounds of surplus gunpowder after World War II and began selling to other gunowners who were interested in reloading. The Hodgdon company now provides a wide range of smokeless and muzzleloading powders.

How much powder is in Hodgdon BLK pistol powder?

Hodgdon CFE BLK Smokeless Powder 8lbs. Hodgdon CFE Pistol Smokeless Powder 8lbs. Hodgdon Pyrodex Select Rifle and Shotgun Powder 1lb.

What’s the difference between ball powder and smokeless powder?

Many ball powders will burn at lower temperatures, which should extend the life of a barrel. Ball powder burns at about 3,200 to 3,300 Fahrenheit, while other powders only reach a max of about 3,400 Fahrenheit. The difference in temperature might seem minimal but it can make a difference over thousands of shots.

How many grains are in a pound of smokeless powder?

There would still be 7,000 grains in one pound of powder, smokeless or not. Just to quickly recap, there are roughly 7,000 grains per pound of powder. Grains are simply a measure of weight, a unit to measure weight.

Is the IMR 4350 the same as the Hodgdon H4350?

Available now as the original IMR 4350, Hodgdon’s H4350 and Accurate Arms’ 4350, the potential for confusion is obvious. Other powders sharing this same situation are 4227, 4198, 4895, and 4831. Each of these powders is available from both the Hodgdon and IMR powder companies.

Hodgdon Powder is arguably the most successful powder company in the U.S.A. Founder Bruce Hodgdon purchased 50,000 pounds of surplus gunpowder after World War II and began selling to other gunowners who were interested in reloading. The Hodgdon company now provides a wide range of smokeless and muzzleloading powders.

How many grains are in a pound of powder?

One pound of powder equals about 7,000 grains. There is actually no grain. Bullets contain either wheat or oats. To determine the number of bullets you can load, you would take the number of grains needed for the specific type of bullet and divide by 7000.