How do I fix VeriFone vx520 error?

December 3, 2020 Off By idswater

How do I fix VeriFone vx520 error?

Follow these steps to reboot your terminal.

  1. Unplug the phone cord from the terminal.
  2. Unplug the power cord from the terminal.
  3. Wait for 30 seconds.
  4. Plug in the power cord.
  5. Wait until the Commserver screen appears.
  6. Plug in the phone line.
  7. Try again to process a transaction.

How do I reset my VeriFone PINpad vx520?

Verifone Vx 520 Rebooting Loop fix

  1. Plug the power cord in again, then hold Enter and 7 together to display the password entry screen.
  2. Key in the password: Press 1, Alpha, Alpha, 6, 6, 8, 3, 1, and then press the green Enter key.
  3. Note: Asterisks appear on the screen as the password is keyed in.

How do you fix a network error on a credit card machine?

Fix Credit Card Terminal Issues

  1. Verify that the cables are securely connected to the correct port on the terminal and the router.
  2. Confirm that the credit card terminal’s amber and green lights are active (illuminated).
  3. Try rebooting your router and/or terminal.

What is the password for VeriFone vx520?

If your are using the default password, it is 1 alpha alpha 66831.

How do I restart my Verifone?

Power cycle the device:

  1. Remove battery from the back and then replace.
  2. Press and hold the green Enter key to restart the terminal.

How do you reset a Verifone VX510?

Restarting Your EBT Terminal – VX510/VX570

  1. Unplug the power supply from the terminal or where it plugs into the wall.
  2. Wait a few seconds.
  3. Plug the power back in.

How do I connect Verifone to my computer?

Windows Setup

  1. Download the Verifone Windows Unified Driver.
  2. Install the driver and click the. Single device system. checkbox.
  3. Verify that the Verifone e355 is running in USB Mode as described in USB Connectivity Configuration, and connect it to the PC using the USB cable.
  4. In the. Device Manager.
  5. Specify this. COM Port.

How do I connect my Verifone vx520 to the Internet?

Connect the Terminal

  1. Remove the cover from the bottom of the terminal.
  2. Connect an ethernet cable to the ‘ETH’ port OR the included phone line cable to the phone port.
  3. Plug the other end of the ethernet cable into an open numbered port on the router.
  4. Connect the power adapter to the round port.

Where do you plug in a PIN pad on a Verifone terminal?

If you are using a pin Pad for debit purchases, plug this in before plugging the terminal into a power source. The pin pad plugs into the port labeled RS232 . 3. Plug in the power cord. Connect your power cord into the port with a green lightning bolt on the far left of the terminal.

What are the error codes on Verifone VX 520?

Troubleshoot VeriFone VX 520 terminals. Your VX 520 terminal may display a communication error code when a transaction fails to process. Common error codes include the following: COMM ERR; TCPIP; LINE BUSY; LINE CLOSE FAIL; NO HOST RESPONSE; DIAL PRIMARY; NO LINE

How to contact talus pay Verifone VX 520?

Confirm the VeriFone VX 520 terminal’s phone cord is connected to the Phone port on the terminal. If you need to dial 9 to reach an outside connection on the line that the terminal uses, please contact our Client Services team at at 800-787-4105 or [email protected].

How to troubleshoot a Verifone terminal communication error?

If the power cord is plugged in when processing a transaction, unplug the power cord and try again to process a transaction. If the transaction fails again, go to the step 3. From the Sale screen, press * to open the Home screen. Select CommServer. Select Troubleshooting.

CategoryQ&A